- seven adjustable steps for Downstream occlusion.
Door Opening Alarm
Low Battery, Empty Battery Alarm
Abnormal Drip Alarm
Infusion Complete alarm (automatic switch for KVO feature)
AC/DC Power Outage Alarm
Start Reminder Alarm (pause elapsed time setting)
Standby alarm (in an interval of 2 minutes when not in infusion)
Door Open when the door is opened.
The Security key: Only the START, STOP and OFF / ON keys.
Air Sensor : Detects air bubbles
Occlusion Sensor Detects clogging of the tube.
Drip Sensor: Detects drips of medical fluids.
Nurse Call: Monitoring is possible if an alarm sounds.
Time Mode: Calculates the flow rate by the infusion time setting.
Gtt Mode: Calculates the flow rate by setting the number of infusion drops.
Dosage Mode: Calculates the flow rate setting the dosage.
Titration: The flow rate can be altered during the infusion (available only when the remaining time for infusion is more than 5 minutes).
Low Battery, Empty: The alarm sounds 30 minutes and 3 minutes before the battery runs out.
Date and Time: The date and time can be checked without a power supply, since the clock is installed.
Pause: The infusion continues automatically after the elapsed time when the pause key is pressed and the infusion is stopped (default 2 minutes, setting range from 1 minute to 24 hours in 1 minute inch units)
Event History: Stores up to 2000.
The electronic information of the infusion pump is stored for over 2 years even if it has been turned off.
